Gray Ghost Amphibian headphones are designed to be fully waterproof and suitable for ALL wet or underwater applications to a minimum depth of 30 feet.

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

Gray Ghost Logo (small).jpg (5694 bytes)

Manufactured for exclusive use with Garrett AT Pro/Gold and Infinium metal detectors.

Gray Ghost Amphibian headphones are designed to be fully waterproof and suitable for ALL wet or underwater applications to a minimum depth of 30 feet.


Gray Ghost Amphibian Headphone (pat.pend.) incorporates a number of dramatic improvements in weatherproof/submersible headphone design. It is designed to replace both the Garrett AT Pro land headphone and the Garrett after-market waterproof headphone. Now you can use one set of headphones for both land and underwater. The design is 100% waterproof and totally submersible to a minimum of 30 feet! No compromise in sound quality for functionality…

Features:

  • Full-range volume control: One knob adjustable volume to YOUR desired level… Land or water… Blowing wind, pounding waves or any extreme condition… You will hear signals loud and clear!!

  • Radical redesign of the traditional method of waterproofing wired connections on Piezo transducers: All underwater headphones use a Piezo type “buzzer” speaker system because land use paper speakers would disintegrate after getting submerged. However, the tonality of the piezo system is unfortunately compromised due to the piezo being dampened with silicone to waterproof the connections… Actually degrading the “buzzing” action of the Piezo. We developed a waterproof “sound box” for the Piezo and the connections are internal. The Piezo will then deliver its full range of audio rivaling land use paper speakers. Our headphone takes the place of BOTH stock land headphones (that came with your detector) and the after-market Garrett “blue phones” Now you can use just one quality set of headphones for ALL your detecting needs.

  • Quality, comfort, fit and finish you expect from Gray Ghost: Once worn, you won’t believe our headphones are designed for underwater use. They are as plush or more plush than most land phones. They fit snug and have soft cushions that won’t slip off when encountering waves, submersing your head, or diving for treasure. Detect for hours in total comfort.

  • Attention to details: We read the user forums to learn everything we could to improve and surpass the Garrett headphones. Our improvements make the detecting experience much better. Improvements like lengthening the coiled wire cord and leaving enough straight wire coming off the connector to allow clipping to the hook under Garrett’s arm cuff. This feature keeps the cable out of your way, eliminates a stress point at the rear of the detector, and helps keep the cable tangle free.

  • IP68 rated connector: Our connectors are manufactured to exact Garrett standard. You can connect into the Garrett AT Pro, AT Gold and Infinium metal detectors while maintaining a 100% waterproof seal. Some users are trying to cut and splice Garrett connectors to an older version of waterproof headphone. Get our quality, fully waterproof connector and protect the integrity and functionality of your Garrett metal detector.

  • Longer Cable Wire: Our coiled wire is longer, stronger and more durable than most standard headphone wiring. We make our waterproof headphones to last!

Technical Specifications:

  • Heavy-duty Coil Cable with IP68 Waterproof Plug that mates securely to the Garrett AT Pro/Gold and Infinium

  • Heavy-duty IP68 Waterproof Volume Control allows you to adjust your volume to suit your detecting conditions on land or in the water.

  • Solid-state Speakers Designed for Maximum Sensitivity, efficiency, durability in dry or wet, regardless of depth.

  • Special Sound-blocking Muff Design eliminates ambient noise up to 24 decibels

  • Heavy-duty Thick, Plush, Soft Polymer Cushions with full-ear surround.

  • Heavy-duty Muff-to-Muff Connection Cable

  • Adjustable Fully Padded Headband… No screws… No wire frame… No rust!

  • Compact Carry and Storage foldable design.

Warranty:

Gray Ghost Amphibian headphones are warranted to be free of defects in materials and workmanship for 2 years as long as they are owned by the original consumer purchaser. This warranty is not transferable. If you did not send in the original warranty card and have a warranty issue, you must include a copy of your purchase receipt with return.

This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

During the warranty period DetectorPro will, at its option, repair or replace free of charge, including labor, any part(s) found to be defective under normal use excluding transportation charges. You must include a check for return shipping payable to DetectorPro for $7.95.

This warranty excludes headphones that have been abused, altered, or repaired by an unauthorized person. It also excludes wire breakage due to improper flexing. It also excludes broken or bent pins on the connector. Please use the plastic connector pin protector supplied with the headphones during non-use and transportation. If you feel you have a warranty problem, call DetectorPro to receive your return authorization number. This number must be displayed on the address label of your return.

A&S Company’s Price $150 Free Priority Shipping call 1-408-248-1233 to order

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

Detector pro metal detector headphones

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

Detector Pro Headphones for Metal Detectors Different types and applications

The Rattler headphone is designed for the demanding professional electronic prospector and gold nugget hunter. Your safety in the field is crucial and we’re sure you’ll never want to use anything but the Rattler! Have you ever been afraid of not hearing a snake or having someone sneak up behind you because you were wearing sound blocking headphones?

Now you can have the superb Gray Ghost sound and still hear what’s around you. This special headphone lets you hear your detector’s signals through one earcup while your other ear is left uncovered to hear things such as dangerous reptiles and snakes. You still have a volume control and a compatibility switch to enable the headphone to work with various detectors. Our new Rattler headphone has been custom designed specifically for the gold nugget hunter. This headphone is engineered rugged, tough, and made to stand up to outdoor use and have the signal power to hear the smallest nuggets!

Rattler headphone is designed to allow hearing outside noises in one ear thus warning you to dangerous reptiles, snakes and even someone sneaking up behind you. In your other ear, you will get the performance of our famous Gray Ghost line of headphones. Built to satisfy the needs of demanding professional electronic prospectors and gold nugget hunters who frequent areas of dangerous reptiles. We feel your safety in the field is crucial and we’re sure you’ll never want to use anything but the Rattler!

Black Widow is engineered for detectorists with challenged hearing and for hunting environments with high ambient noise levels. Black Widow headphones were designed to accommodate the professional detectorist with special hearing requirements and for environments with high ambient noise levels. Large extended muffs are designed to block ambient noise to a higher degree for huntsites in proximity to urban traffic and surf roar. The Black Widow contains a dual mini-toggle switching system like our famous Gray Ghost Ultimate. One switch provides greater compatibility with detector audio systems and the other switch allows signal limitation when extreme volume is not required. Also provided are two independent volume controls for those detectorists with unequal hearing ability in each ear. You still get our “industry first” quality components, design and construction without compromise. Black Widows are “deadly”, but guaranteed not to “Sting” you!CAUTION: The significant volume output of the Black Widow compared to our main line of headphones requires us to warn the consumer of potential eardrum damage if detector signal is not regulated to tolerant levels. Without the limiting circuit engaged, we recommend starting with a minimal headphone volume control setting with detector volume at maximum, then gradually increase headphone volume controls as needed and tolerated.

Technical Specifications:

  • Dual rotary volume control with “stay put” segmented “click” positioning.
  • Selector switch for metal detector compatibility with all single-output metal detectors without adapters.
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty strain relieved coil cable with special 1/4″, 90 degree angle stereo connector.

  • Compact carry and storage foldable design.
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speakers designed for maximum volume, sensitivity, efficiency, durability, and signal quality.
  • Special ultra sound-blocking extended muff design eliminating environmental ambient noise up to 29 decibels.
  • Frequency response: 200 – 3200 Hz… only what your detector uses.
  • Sensitivity: 72 db @ 1 KHz Min.
  • Impedance: 150 ohms nominal.
  • Backed by a limmited lifetime warranty.

Black Widow headphones were created to accommodate the professional detectorist with special hearing requirements and for environments with high ambient noise levels. They have extreme output and noise blocking capacity. Still built with our “industry first” quality components, design and construction without compromise.

Now you can have the superb Gray Ghost sound and still hear what’s around you. This special headphone lets you hear your detector’s signals through one earcup while your other ear is left uncovered to hear things such as dangerous reptiles and snakes. You still have a volume control and a compatibility switch to enable the headphone to work with various detectors. Our new Rattler headphone has been custom designed specifically for the gold nugget hunter. This headphone is engineered rugged, tough, and made to stand up to outdoor use and have the signal power to hear the smallest nuggets!

Technical Specifications:

  • Single rotary volume control with “stay put” segmented “click” positioning.
  • Selector switch for metal detector compatibility with all single-output metal detectors without adapters.
  • Heavy-duty coil cable available with special 1/4″, 90 degree angle stereo connector.

  • Compact carry and storage foldable design.
  • Heavy-duty polymer muff with full-ear surround, soft comfortable cushion.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speaker designed for maximum sensitivity, efficiency, durability, and signal quality.
  • Special sound-blocking muff design eliminating environmental ambient noise up to 24 decibels in one ear only.
  • Frequency response: 200 – 3200 Hz… only what your detector uses.
  • Sensitivity: 72 dB @ 1kHz min.
  • Impedance: 150 ohms nominal.
  • Backed by a limited lifetime warranty.

 

Gray Ghost Logo.jpg (9397 bytes)

Special DMC version designed for use with NautilusTM DMC & Minelab CTX detectors or any two-channel audio equipment that presents different signals to each ear. Relic & Coin Hunters… Give yourself the superb Gray Ghost sound made especially for your Nautilus DMC detectors. Each channel has its own separate limiter and separate volume control. Made especially for Nautilus DMC and Minelab CTX metal detectors.

Technical Specifications:

  • Separate volume control for each channel
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty coil cable with special 1/4″, 90 degree angle stereo connector.

  • Compact carry and storage foldable design.
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speakers designed for maximum sensitivity, efficiency, durability, and signal quality.
  • Special built-in signal limiting circuitry on each channel to protect hearing from high volume hits… no batteries!
  • Special sound-blocking muff design eliminating environmental ambient noise up to 24 decibels.
  • Frequency response: 200 – 3200 Hz… only what your detector uses.
  • Sensitivity: 72 dB @ 1kHz min.
  • Impedance: 150 ohms nominal.
  • Backed by a limited lifetime warranty.

Gray Ghost Logo (small).jpg (5694 bytes)

Built upon the solid foundation of the Famous Original Gray Ghost, NDT Means “No Down Time!” 

Gray Ghost NDT HeadphonesDoes this sound familiar… A month of research and you’ve just hiked two miles into the forest after pinpointing an old cellar hole on an old map. You can only afford one set of quality headphones. As you setup your detector and power on, you hear nothing! Suddenly you remember the tree branch that caught and yanked your headphone cord really hard. Luckily you packed mini-phones, but they have an 1/8″ plug and you lost the adaptor! Now you’ll have to settle for using the loudspeaker to hear the deepest old coins, jewelry and relics… That is if your detector has a built-in speaker!If this has happened to you, you already know the value of having a good backup. Our universal GRAY GHOST® NDT headphones are based on the strong features of our already famous Gray Ghost Originals. For the NDT, we have engineered a very rugged detachable cord with a high-quality connector system and we give you TWO complete cords! You can have your choice of cords with two 1/4″ plugs or two 1/8″ plugs… Or you can have one of each size.So next time you plan on a serious day of metal detecting, don’t take chances, bring the GRAY GHOST® NDT.

Technical Specifications:

  • High-quality locking connector system

Gray Ghost High-Quality Locking Connector

  • Dual rotary volume control with “stay put” segmented “click” positioning.
  • Selector switch for metal detector compatibility with all single-output metal detectors without adapters.
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty coil cable with your choice of two 1/4″ or two 1/8″ stereo connectors, or one of each size

Gray Ghost NDT Cable Plug Choices

  • Compact carry and storage foldable design.Gray Ghost NDT Compact Fold and Carry
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speakers designed for maximum sensitivity, efficiency, durability, and signal quality.
  • Special built-in signal limiting circuitry to protect hearing from high volume hits… no batteries!
  • Special sound-blocking muff design eliminating environmental ambient noise up to 24 decibels.
  • Frequency response: 200 – 3200 Hz… only what your detector uses.
  • Sensitivity: 72 dB @ 1kHz min.
  • Impedance: 150 ohms nominal.
  • Backed by a limited lifetime warranty.

Gray Ghost Logo (small).jpg (5694 bytes)

The Ultimate Gray Ghost® is our new no-holds-barred category killer headphone.

 Ultimate Gray Ghost Title.jpg (5209 bytes)Ultimate_Gray_Ghost_Phones.jpg (22220 bytes)This is one headphone you have to try for yourself in order to believe. We started with our now famous Original Gray Ghost headphone and added all the custom enhancements our customers have been requesting most. Now you too can have the ultimate sound quality made possible by special speaker elements in a tuned cavity design. This design means greater sensitivity to tiny targets and more raw power at full volume. The Original Gray Ghost’s switch has been removed in favor of more durable push-buttons in shielded locations by the main strain relief. Our special limiter circuit gives you a smooth reduction at excess volume levels, not like our imitators’ noise-inducing clipping effect, and our limiter can be disabled with the touch of a button. Additional new features are an industrial grade nylon 6/6 strain relief at a new neck-hugging angle. This reduces stress on the cable and helps it fall closer to your body for fewer branch snags in the most rugged terrain. Try one and we are sure you will agree that no one has ever built a metal detector headphone anywhere near this clear and this sensitive with as many features as the Ultimate Gray Ghost.

Technical Specifications:

  • Single rotary volume control with “stay put” segmented “click” positioning.
  • Push-button selector switch for metal detector compatibility without adapters.
  • Push-button switch activates limiter.
  • Special low-noise signal limiting circuitry protects your hearing from high volume hits without batteries.
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty coiled cord with a special three conductor 1/4″, 90 degree angle stereo connector.
  • Industrial grade Nylon 6/6 pigtail strain relief on cord termination.

Compact_Utimate.jpg (6113 bytes)

  • Compact carry and storage foldable design.
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speaker elements are the ultimate in sensitivity, efficiency, durability, and signal quality.
  • Special sound-blocking muff design eliminating environmental ambient noise up to 24 decibels.
  • Backed by a limited lifetime warranty.

Gray Ghost Logo (small).jpg (5694 bytes)

The Original Gray Ghost is designed for the demanding professional coin, relic, and jewelry hunter. These phones are built by detector people for detector people.

 Original Gray Ghost Title.jpg (5060 bytes)Original Gray Ghost Phones.jpg (22225 bytes)Now for the first time there is a serious alternative to the many headphones available in the past for metal detecting. Our new Gray Ghost® Headphones have been custom designed specifically for metal detector users. Start hearing those “ghost signals” others are missing. Our headphones are engineered rugged, tough, and made to stand up to outdoor use. Gone are the days of wimpy phones that break on the littlest twig… gone are the days when outdoor noise kept you from hearing the deepest targets… gone are the days when headphones wouldn’t stay on your head… gone are the days of discomfort and loss of concentration… gone are the days of frustrating two-knob volume adjustments… and with our special sound limiting circuitry, gone are the days of headaches from too loud hits!

Technical Specifications:

  • Single rotary volume control with “stay put” segmented “click” positioning.
  • Selector switch for metal detector compatibility with all single-output metal detectors without adapters.
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty coil cable with special 1/4″, 90 degree angle stereo connector.

Compact Original.jpg (4955 bytes)

  • Compact carry and storage foldable design.
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speakers designed for maximum sensitivity, efficiency, durability, and signal quality.
  • Special built-in signal limiting circuitry to protect hearing from high volume hits… no batteries!
  • Special sound-blocking muff design eliminating environmental ambient noise up to 24 decibels.
  • Frequency response: 200 – 3200 Hz… only what your detector uses.
  • Sensitivity: 72 dB @ 1kHz min.
  • Impedance: 150 ohms nominal.
  • Backed by a limited lifetime warranty.

Gray Ghost DMC

NEW! Attention Relic & Coin Hunters using Nautilus DMC metal detectors… Now you can have the superb Gray Ghost sound in each channel of  your detector controlled by independent volume controls!

Gray Ghost NDT

NDT means “No Down Time!” Built on the solid foundation of the Original Gray Ghost, the Gray Ghost NDT comes with two detachable cables, each with a high-quality locking connector and your choice of plug sizes. Hunt with a new feeling of security!

Ultimate Gray Ghost

The Ultimate Gray Ghost is our second generation premium headphone with the best sound available anywhere. Top treasure hunters in every field have told us the Ultimate Gray Ghost is the new leader of the pack.

Original Gray Ghost

The Original Gray Ghost was our first deluxe headphone and it is still the most popular for the demanding professional coin, relic, and jewelry hunter. These phones are built by detector people for detector people.

Gray Ghost Deep Woods

The Gray Ghost Deep Woods is for die-hard relic hunters or anyone who pushes into the most hostile treasure hunting environments.

 

Gray Ghost Logo (small).jpg (5694 bytes)

The Gray Ghost Deep Woods takes you into the roughest back country.

 Gray Ghost Deep Woods.jpg (6420 bytes)Gray Ghost Deep Woods Phones.jpg (20806 bytes)The Gray Ghost Deep Woods is designed for the die-hard relic hunter. We’ve improved our Original Gray Ghost® to stand up to the most severe abuse. The Deep Woods has no exterior controls, no exposed metal, rainproofing, cable strain reliefs, and nothing to catch on branches. Like the Ultimate, the cable is protected by the best strain relief and improved placement places it along the neck away from branches. Our special limiter circuit gives you a smooth reduction at excess volume levels, not like our imitators’ noise-inducing clipping effect. Our metal detector compatibility and limiter switches are easily accessible on the inside of the cup where they are totally protected.

Technical Specifications:

  • Selector switch for metal detector compatibility without adapters.
  • Selector switch for limiter.
  • Special low-noise signal limiting circuitry protects your hearing from high volume hits without batteries.
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty coiled cord with a special three conductor 1/4″, 90 degree angle stereo connector.
  • Industrial grade Nylon 6/6 pigtail strain relief on cord termination.

 Compact Deep Woods.jpg (5657 bytes)

  • Compact carry and storage foldable design.
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speaker elements are the ultimate in sensitivity, efficiency, durability, and signal quality.
  • Special sound-blocking muff design eliminating environmental ambient noise up to 24 decibels.
  • Frequency response: 200 – 3200 Hz… only what your detector uses.
  • Sensitivity: 72 dB @ 1kHz min.
  • Impedance: 150 ohms nominal.
  • Backed by a limited lifetime warranty.

Nuggett Busters Logo.jpg (12544 bytes)

Nugget Busters were designed for the demanding professional electronic prospector and gold nugget hunter. If you’re just getting started in gold hunting, we’re sure you’ll never want to use anything but Nugget Busters! Nugget Buster Phones.jpg (23085 bytes)Our new Nugget Busters headphones have been custom designed specifically for the gold nugget hunter. Start hearing the “whisper signals” others are missing. Our headphones are engineered rugged, tough, and made to stand up to outdoor use. Gone are the days of wimpy phones that break on the littlest twig… gone are the days when outdoor noise kept you from hearing the deepest targets… gone are the days when headphones wouldn’t stay on your head… gone are the days of discomfort and loss of concentration… gone are the days of frustrating two-knob volume adjustments… just wide-open signal power to hear the smallest nuggets!

Technical Specifications:

  • Single rotary volume control with “stay put” segmented “click” positioning.
  • Selector switch for metal detector compatibility with all single-output metal detectors without adapters.
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty coil cable with special 1/4″, 90 degree angle stereo connector.

Compact Nuggett Busters.jpg (5965 bytes)

  • Compact carry and storage foldable design.
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speakers designed for maximum sensitivity, efficiency, durability, and signal quality.
  • Special sound-blocking muff design eliminating environmental ambient noise up to 24 decibels.
  • Frequency response: 200 – 3200 Hz… only what your detector uses.
  • Sensitivity: 72 dB @ 1kHz min.
  • Impedance: 150 ohms nominal.
  • Backed by a limited lifetime warranty.

Nugget Busters

Nugget Busters were designed to the specifications of demanding professional electronic prospectors and gold nugget hunters. They are similar to the Original Gray Ghost but without any limiter for wide-open sound. If you’re just getting started in gold hunting, we’re sure you’ll never want to use anything but Nugget Busters.

Nugget Busters NDT

Based on the specifications of demanding professional electronic prospectors and gold nugget hunters. They are similar to the Gray Ghost NDT but without any limiter for wide-open sound. Engineered for No Down Time in the field from cord breakage.

 

Built upon the solid foundation of the Famous Original Gray Ghost, NDT Means “No Down Time!” 

 Does this sound familiar… A month of research and you’ve just hiked a mile into the desert after pinpointing an old claim site on an old map. You can only afford to carry one set of quality headphones. As you setup your detector and power on, you hear nothing! Suddenly you remember back at the car when the door caught and yanked your headphone cord really hard. Luckily you packed mini-phones, but they have an 1/8″ plug and you lost the adaptor! Now you’ll have to settle for using the loudspeaker to hear the deepest nuggets, old coins and relics… That is if your detector has a built-in speaker!If this has happened to you, you already know the value of having a good backup. Our universal Nugget Busters NDT® headphones are based on the strong features of our already famous Gray Ghost NDT®. For the Nugget Busters NDT, we have engineered a very rugged detachable cord with a high-quality connector system and we give you TWO complete cords! You can have your choice of cords with two 1/4″ plugs or two 1/8″ plugs… Or you can have one of each size.So next time you plan on a serious day of metal detecting, don’t take chances, bring the Nugget Busters NDT.

Technical Specifications:

  • High-quality locking connector system

  • Dual rotary volume control with “stay put” segmented “click” positioning.
  • Selector switch for metal detector compatibility with all single-output metal detectors without adapters.
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty coil cable with your choice of two 1/4″ or two 1/8″ stereo connectors, or one of each size

Gray Ghost NDT Cable Plug Choices

  • Compact carry and storage foldable design.
  • Less reflective muff color
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speakers designed for maximum sensitivity, efficiency, durability, and signal quality.
  • No limiting circuitry for loud wide-open signaling.
  • Special sound-blocking muff design eliminating environmental ambient noise up to 24 decibels.
  • Frequency response: 200 – 3200 Hz… only what your detector uses.
  • Sensitivity: 72 dB @ 1kHz min.
  • Impedance: 150 ohms nominal.
  • Backed by a limited lifetime warranty.

Jolly Rogers Logo.jpg (9532 bytes)

Our NEW Jolly Rogers Ultimates have added features usually found only on more expensive headphones. Built upon the foundation of our popular original Jolly Rogers headphones, we now introduce the Jolly Rogers Ultimates! You get the same rugged construction and quality as the originals, but now with added features like Dual Volume controls and our famous Limiter Switch that reduces the volume of excessively loud signals. Our special limiter circuit gives you a smooth reduction at excess volume levels, not like our imitators’ noise-inducing clipping effect. Our limiter can be disabled with the click of a toggle. You’ll like the way these headphones cover your entire ear comfortably and block out ambient noise allowing you to hear the faintest signals. You’ll like the solid feel of the comfortable headband to earcup adjustment and the fact there are no parts to rust or corrode. You’ll like the feel of the soft earcup cushion material against your head. You’ll like our segmented volume adjustment controls that stay put where you want them to be. You’ll like the way Jolly Rogers fold up to take less space in your equipment bag or case. Last but not least, you’ll love the solid performance of Jolly Rogers Ultimates headphones and the fact that they are protected by a limited lifetime warranty!

Technical Specifications:

  • Dual-rotary volume control with “stay put” segmented “click” positioning.
  • Limiter Switch for reduction of excessively loud target signals.
  • Selector switch for metal detector compatibility with all single-output metal detectors without adapters.
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty coil cable with special 1/4″, 90 degree angle stereo connector.

  • Compact carry and storage foldable design.
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speakers designed for maximum sensitivity, efficiency, durability, and signal quality.
  • Special sound-blocking muff design eliminating environmental ambient noise up to 20 decibels.
  • Frequency response: 150 Hz – 20 kHz… only what your detector uses.
  • Impedance: 16 ohms nominal.
  • Backed by a limited lifetime warranty.

Jolly Rogers Ultimates

NEW Jolly Rogers Ultimates have Dual Volume Controls and our famous Limiter Circuit. Everything you love about our original Jolly Rogers, but now with more features usually found only on more expensive headphones!

Jolly Rogers

Jolly Rogers are smaller and lighter but still engineered tough for the beginner and the professional coin, relic, gold nugget, and jewelry hunter.

 

Jolly Rogers Logo (small).jpg (7496 bytes)

Jolly Rogers are engineered for the beginning and professional coin, relic, gold nugget, and jewelry hunter.

Jolly Rogers Title.jpg (3807 bytes)Jolly Rogers Phones.jpg (24019 bytes)Have a Jolly Good Time finding treasure with our new Jolly Rogers metal detector headphones. By “Jolly Good Time” we mean you’ll find them super comfortable, adjustable, and they just plain stay on your head! In fact, Jolly Rogers headphones have the same rugged construction as our now famous, full-featured professional Gray Ghost headphones. You’ll like the way these headphones cover your entire ear comfortably and block out ambient noise allowing you to hear the faintest signals. You’ll like the solid feel of the comfortable headband to earcup adjustment and the fact there are no parts to rust or corrode. You’ll like the feel of the soft earcup cushion material against your head. You’ll like our segmented volume adjustment control that also stays put where you want it to be. You’ll like the way Jolly Rogers fold up to take less space in your equipment bag or case. Last but not least, you’ll love the solid performance of Jolly Rogers headphones and the fact that they are protected by a limited lifetime warranty!

Technical Specifications:

  • Single rotary volume control with “stay put” segmented “click” positioning.
  • Selector switch for metal detector compatibility with all single-output metal detectors without adapters.
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty coil cable with special 1/4″, 90 degree angle stereo connector.

Compact Jolly Rogers.jpg (6109 bytes)

  • Compact carry and storage foldable design.
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speakers designed for maximum sensitivity, efficiency, durability, and signal quality.
  • Special sound-blocking muff design eliminating environmental ambient noise up to 20 decibels.
  • Frequency response: 150 Hz – 20 kHz… only what your detector uses.
  • Impedance: 16 ohms nominal.
  • Backed by a limited lifetime warranty.

 

Designed for detectorists who want an economical alternative to our professional line.

NEW! Now Available!

Treasure EarsTM stereo headphones were designed to accommodate the detectorist who desires a lightweight comfortable headphone with a price point below our professional grade phones.

Technical Specifications:

  • Designed in the U.S.A.
  • Excellent sound quality for metal detecting
  • Separate volume control for each ear
  • Comfortable lightweight design
  • Adjustable headband with Stainless Steel frame
  • Coiled cord for easy extension
  • 1/4″ right-angle plug
  • Built with quality materials
  • Speakers designed for maximum sensitivity
  • Power Output: 100 milli-watts
  • Impedance: 32 Ohms
  • Sensitivity: 105 db
  • Cord Length: 6 ft. (extended)
  • Backed by a 1 Year Warranty

Back to Metal Detector Page

Lowest Metal Detector Sale Prices

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

Metal Detectors FAQs

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

FAQs (The Most Frequently Asked Metal Detectors Questions)

1. What do I need to know about my detector’s batteries?

NiCads (nickel/cadmium) and nickel metal hydrides are rechargeable batteries that last between 8 and 12 hours and cost up to 10 dollars each. Alkalines are disposable batteries that last between 25 and 30 hours and cost about two dollars each. Because extreme temperatures can drain battery power, it is recommended that you always carry a spare set of batteries. In cold weather, attaching the battery pack to your belt under your jacket can help keep batteries warm and dry.

2. What is discrimination?

Discrimination refers to a metal detector’s ability to reject a target, such as a pull tab and foil or accept a target such as a coin or piece of jewelry based on its metallic composition. With features like Target Imaging and Tone ID, your detector can tell you what your target is before you ever dig.

3. At what depths can a detector find treasure?

It’s impossible to predict with complete certainty how deep a specific detector can be expected to find metal. This is because there are a variety of factors that affect a detector’s performance. For example, the amount of minerals in the soil, the type of metal that’s being detected and the quality of the detector itself impact how deep your metal detector will hunt. The size and surface area of a target also affects metal detection. For example, the larger a metal target, the easier and more deeply it can be detected.

Using a searchcoil larger in diameter can also help a detector achieve greater depth. A 12.5” searchcoil produces a more extensive magnetic field that penetrates the ground more deeply to find objects at depths that a smaller size searchcoil can’t reach.

4. How do I pinpoint a target?

Slowly and methodically sweep your searchcoil from side to side, keeping it one to two inches above the surface. Overlap each sweep by advancing the searchcoil by about one quarter to one half of its diameter. Scanning in a straight line helps to keep the searchcoil level and the overlap sweeps uniformly while reducing the likelihood of lifting the searchcoil after each sweep. Listen for a peak in the audio sound. Hold the searchcoil one to two inches off the ground and slowly sweep it back and forth in an X pattern. Note where the sound becomes the loudest. The target should be located in the center of the imaginary X. Many of today’s modern metal detectors are equipped with an electronic pinpoint button. Read your owner’s manual for complete electronic pinpointing instructions.

5. What is True Size?

True size is obtained in much the same way as true depth. Multiple receivers, within a GTI metal detector, add additional dimensions of target ID, not just material ID. Ultimately, however, it;s how multiple receivers relate to one another that provides these true measurements, not just merely having them. True size and depth are Garrett exclusive features and are only possible with Garrett GTI detectors, which were designed to give treasure hunters the most accurate information about a target before they dig.

6. What is the significance of a detector’s Operating Frequency?

A metal detector transmits magnetic energy into the ground and senses distortion in the magnetic field due to the presence of a metal object. The frequency content, temporal form and amplitude of this magnetic energy can affect detection capabilities and overall performance characteristics. There are two primary detection technologies used in today´s metal detectors: Single Frequency (also known as Continuous Wave) and Multiple Frequency (e.g. Pulse Induction and Dual Frequency). Each technology has its own detection characteristics, understanding these will enable you to choose the right detector for your treasure hunting needs.

7. Do I need more than the one searchcoil?

The searchcoil is a vital part of your metal detector. It is the flat, typically circular disk, which generates a magnetic field and senses metallic targets in the surrounding environment. It is located at the end of the stem and is connected to the control housing via a cable that is wound around the stem. The size, depth and energy output (power) of the magnetic field is determined by the shape and size of the searchcoil. Understanding the purposes behind the various sizes and shapes of searchcoils will empower you with the ability to choose the best searchcoil for the right application. For a detailed explanation of the types and benefits of optional searchcoils read our Searchcoil site.

8. Is overall depth compromised when searching with discrimination?

Yes. To achieve the greatest depths when searching for large, cache sized-objects, many professionals hunt in the All-Metal mode and use a large searchcoil.

9. Do I really need headphones when treasure hunting?

For maximum success and privacy when treasure hunting you should use headphones. They are essential in noisy areas and enhance audio perception by bringing the sound directly into your ears.

10. Are there online forums or treasure clubs I can join?

There are countless online forums where treasure hunters share their own tips, help other hobbyists with their detector, and of course, show off their latest treasure. You can also contact your local dealer, he or she can point you towards all the exciting clubs and events that other treasure hunters are hosting right in your own backyard!.

11. Are there any laws surrounding treasure hunting?

Every square inch of property in the United States is owned — by an individual, group, corporation, governmental body, etc. And, there are definitely laws that have been written to apply to various treasure hunting situations. Each state has its own statutes concerning where you can and cannot search and whether you may keep the treasure you find. You must learn these laws, and remember that they can be changed at any time.

 

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

Metal Detector Terms Part 1

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

Metal Detector and Detecting Terms Part 1 All Metal:

Any operating metal detector mode or control setting which allows total acceptance of any type of metal targets. Usually associated with the Ground Balance mode.

Alkaline: A type of battery able to sustain longer periods of current drain with greater storage life when compared to the standard carbon-zinc type.

Air Test: A test performed by moving various sized metal samples beneath the metal detector searchcoil to check the detector’s features and target response. This test is not an accurate indicator of ground depth penetration capability.

Audio ID: See Tone ID.

Audio Response: See Target Response.

Auto Tune: Circuitry which continuously retunes the detector’s threshold to the initial manually tuned audio level. The retuning rate following target rejection or drift can be preset or variable.

Black Sand: One of the most extreme components of nonconductive, negative ground minerals. Also called magnetite (Fe304) or magnetic iron oxide.

Back Reading: A false signal, when operating in the discriminate mode, caused by a rejected target coming within one inch of or contacting the searchcoil bottom.

Bench Test: An air test to determine at what approximate discriminate settings various metal samples are rejected or accepted. The test is conducted in a non- metallic area.

Body Mount: A configuration whereby the control housing is separated from the control shaft and fastened to the operator’s body lessening arm fatigue and expanding usability for shallow water hunting. Also known as hip mount.

Coil: See Searchcoil.

Coin Depth Indicator: A visual indicator used in conjunction with calibrated circuitry to indicate depth of buried coins in inches or millimeters.

Cache: Any intentionally buried or secret hoard of valuables.

Carbon-Zinc: The most common standard dry cell battery type.

Concentric: A searchcoil configuration using one or more transmit and one receive windings having unequal diameters aligned on a common center; most recently arranged on the same plane and called coplanar concentric.

Convertible/Combination: A metal detector configuration allowing versatility in operator handling, i.e., hand held to body mount.

Coplanar: Any searchcoil configuration in which transmit and receive windings occupy the same level or plane.

Crystal Controlled Oscillator: A transmit oscillator employing a crystal to maintain stable output frequency.

Conductive Salts: One of the major mineral types which make up the positive ground matrix. Wet, ocean-salt sand produces a positive rise or metallic type response on an air tuned threshold.

Conductivity: The measure of a metal target’s ability to allow eddy current generation on its surface.

Control Housing: A metal or plastic box which holds circuit boards, indicators, meter, controls and power supply.

Depth Penetration: The greatest measure of metal detector’sability to transmit an electromagnetic field into the soil matrix and produce a target signal.

Detection Pattern: The densest or strongest region of the searchcoil’s electromagnetic field where detection occurs. Its shape is balloon and changes in size directly proportional to target surface area.

DetectionNet:  best metal detecting site

Discrimination: Adjustable circuitry which ignores or nulls audio responses from a specific conductivity range allowing positive responses to be heard from metals higher in conductivity above the discriminate control setting. Designed primarily to eliminate audio response from trash metals. See also Motion Discriminator.

Double D or 2 D: See Wide Scan.

Drift: A loss of threshold tuning stability caused by temperature change, battery condition, ground mineral content or detector design.

Detuning: Adjusting the audio threshold into the null or less sensitivity tuning zone. Also a method of narrowing a target signal width manually for precise pinpointing. This is accomplished by retuning to audio threshold over the target response area.

Double Blip: A signal characteristic common to elongated ferrous targets such as nails or coins lying close to the surface detected in the All Metal no-motion mode.

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

top 10 best selling metal detectors for the year so far

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

Top 10 Best Selling Metal Detectors 2013 are: The following metal detectors seem to be the most popular and best selling detectors because of quality, performance, prices and many other issues.

1-Garrett Ace 250 Metal Detector coin  hunting, general all purpose

2- Garrett AT Pro Metal Detector all purpose, salt water beach, diving, coins jewelry

3- Garrett Ace 150 Metal Detector coins and jewelry

4- Garrett Ace 350 Metal Detector coins and jewelry relics

5-Garrett GTI 2500 Metal Detector all purpose

6-Tesoro Vaquero Metal Detector all purpose

7- Tesoro Cibola coins jewelry

8- Tesoro Lobo prospecting

9-Tesoro Outlaw Metal Detector coins, jewelry

10- Tesoro Tejon Metal Detector all purpose coins relics

And the best selling most popular pinpointer is:

Garrett Pro-Pointer

the second best selling pinpointer is Vibra probe 580

 

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

Metal Detectors used for hunting treasures, security and safety

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

Metal Detector for Treasure or Security

Many believe using a metal detector can be a great way to find treasures underground. Indeed world’s most ancient treasure have been recovered by modern day metal detectors. Depending on the strength of your detector, you may find wonderful things just under the surface of the ground, in the sand, or among bushes and brush. I have found treasure all over the world and on every corner of all types of locations.  Or, if you have a stronger detector, you may have to do some digging, but you could find real buried treasure. People have found rare coins, gold nuggets, watches, cache, civil war relics, and jewelry, and other precious metals like silver, gold, bronze, platinum, copper using metal detectors. It’s sort of a hobbyist stereotype to see an old man walking on a beach with a detector in his hand, but it’s a stereotype for a reason. You really can find treasure in the sand.

In the sense of Security it might be the real treasure. Everyone wants to feel safe, especially when they’re going to a government building, a school, or an airport. Some Special Metal detectors help security personnel and police officers discover a hidden firearm, a knife, or other object that can be used to harm people or destroy property. Some detectors can even find things like explosives, potential chemical weapons, or other harmful tools that can create mayhem.

You can also use garrett metal detectors to protect your merchandise. If you’re a retailer, and you sell small, valuable, easy to steal items such as jewelry, video games, and electronics, you can use a metal detector to keep your patrons honest. Using a security tag, you can have the detector programmed to stop anyone whose parcels contain an item of yours that is connected to the tag. This is a great way to keep shrinkage (costs of loss due to theft or faulty merchandise) down, which in turn keeps prices down and customers happy. Garrett metal detectors come in many different forms and different levels of sophistication. The most popular one is Garrett Ace 250 Metal Detector They can be used by hobbyists to find treasures on local beaches, or they can be used by airports to find potential threats to security. They can also be used to find stolen merchandise before it makes it out of your store. No matter how you use your metal detector, it can really help you stay safe, secure, and solvent.  Metal detectors can also detect land mines and save the lives of many.  There are specialized detectors for this application, used by many countries and by the united nations. Metal Detectors have many other  useful applications from medicine to food processing.

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

code of etchis for treasure hunters : metal detectors

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

Treasure hunters, the users of metal detectors Code of Ethics

You must always check federal, state, county and local metal detecting laws before searching. It is your responsibility to “know the law.”Abide by all metal detector laws, ordinances or regulations that may govern your search or the area you will be in.Never trespass.

Always obtain permission prior to entering private property, mineral claims, or underwater salvage leases.Do not damage, deface, destroy, or vandalize any property (including: ghost towns and deserted structures), and never tamper with any equipment at the site.Never litter. Always pack out what you take in, and remove all trash dug in your search.Fill all holes, regardless how remote the location, and never dig in a way that will damage, be damaging to, or kill any vegetation.Do not build fires, camp or park in non-designated or restricted areas.

Leave all gates and other accesses to land as found.Never contaminate wells, creeks, or any other water supplies.Be courteous, considerate, and thoughtful at all times.Report the discovery of any items of historic significance to the local historical society or proper authorities.Uphold all finders, search and salvage agreements.Promote responsible historical research and artifact recovery, and the sharing of knowledge with others.

 

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

General metal detector and detecting questions that come to mind

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

General Detecting Questions about metal detectors and your metal detector

Why are there so many types of searchcoils?

There are two main types of searchcoils currently on the market—the concentric and the widescan. The concentric coil uses two round antennas, one inside the other. This coil is used on most detectors that are designed for coin, jewelry, and relic hunting. Concentric coils discriminate very well and pinpoint very easily due to the fact that the strongest signal is always in the center of the coil. Widescan coils use two D-shaped antennas that are placed back to back. Because of this configuration, they are also called “double-d” coils. The widescan coil is less affected by mineralization than the concentric, so it is generally used for gold prospecting or relic hunting in bad ground. Pinpointing is done with the heel or toe of the coil. After determining the type of coil that is best for your type of hunting, the next thing to consider is the size.

There are many different sizes of coils available and each one may fine tune your hunting but only if you get the correct size. Larger coils go deeper than smaller coils but only on larger targets. When using a large coil, you may lose sensitivity to small targets. A large coil is also more susceptible to masking. Masking happens in the Discriminate mode when a good target and junk target are both under the coil at the same time. If the targets are close enough together, the bad target will be discriminated out, and at the same time, the detector will not be able to pick up the good target. Masking is very common in junky playgrounds and in-and-around old house sites.

Smaller coils will concentrate the signal and make the detector more sensitive to the little targets. Unfortunately, smaller coils tend to lose depth when compared to their larger cousins. Being that these coils don’t have as wide a search pattern, they are also less likely to mask targets in trashy hunting situations.

Knowing where you are going to hunt and what you are hunting for will go a long way in helping you choose the right coil for your needs. A larger coil is needed when hunting in a clean area or when hunting for relics that may tend to be deeper. A small coil will help find the smaller targets such as gold nuggets or fine jewelry or can be used when coin & jewelry hunting extremely trashy sites.

Can one detector really do it all? Most metal detectors are designed to excel at one type of hunting or another but can be used for other types of hunting as well. For example, most gold prospecting metal detector machines use some form of higher gain in the circuitry to get better sensitivity to small gold nuggets in the ground. While this is a good thing for prospectors, coin hunters may find it annoying that their detectors are picking up every bit of a pulltab that has been run over with a lawnmower.

The art of metal detector design is the art of compromise. By accenting certain characteristics of any detector, you take away from other features. Any detector that does it all may not work as well for certain very specific treasure hunting. Talk to as many people as is possible and be realistic about your hunting needs. Finding a detector with the features that will best suit your hunting style is the most important choice you can make when deciding on a new detector.

What is the best metal detector?

This is probably the #1 question that I get asked. Unfortunately, there is no one single answer. Each metal detectorist has specific needs that cannot be answered by one single detector. The easiest way to find the “best” detector is to evaluate your detecting style, your experience level, and the time that you will spend hunting. After taking all of these things into consideration, then you will be able to find a detector that fits your needs and your budget.

Are detectors with a lot of knobs better than those with just a few?

How much better is a $1000 detector than a $200 detector and in what ways?

The answers to these questions are connected, so I will try to answer them together. Generally speaking, the higher the price of a detector, the more features that it will have. More features translate into more knobs. The more features and/or knobs that a detector has, the more you are able to tune the detector to the type of hunting conditions that you are likely to encounter.

With that being said, the downside to a large number of features is that even though you are able to fine tune the detector to match the local conditions, there are also more ways of setting up the detector incorrectly. Setting up a machine “wrong” may result in a decrease in depth and sensitivity and your $1000 machine may be outdone by a $200 one.

Will metered detectors find coins deeper than non-metered?

The use of a meter on a detector is no longer any indication of its depth capabilities. When metered machines were the top-of-the-line machines, engineers matched the detectors with the best possible circuitry. With the advent of more cost effective digital signal processing and LCD displays, there are a number of units available that are inexpensive and have meters. While these detectors have acceptable depth, there are plenty of other machines that have better.

The main thing to remember is that a metered machine will give an accurate audio signal on a target much deeper than an accurate meter reading. Air tests are a good indication of the ability of any display-type detector, but once the target is in the ground, there are several variables that may come into play affecting the reading. The most common is the fact that pulltabs and gold rings fall into the same area based on the mixing of alloys. The orientation in the ground can also cause some confusion for the detector. If you choose to get a metered machine, dig any target that gives a good audio signal regardless of the meter reading. You may dig up more trash, but in the long run, you will find more desirable targets.

Is a crystal-controlled detector better than one that is not crystal-controlled?

Most manufacturers use crystal resonators in their machines because of the tight tolerances of the resonator. If the part is listed as 15.7 kHz, all parts will be exactly that frequency. The downside of these super tight tolerances is that the detectors are more likely to crosstalk with each other. In other words, the transmit and receive signals from two or more different machines will start interfering with each other.

Tesoro detectors use an LC or tank circuit to generate operating frequency. A capacitor and an inductor are paired together and create a naturally occurring efficient frequency. Variation in the capacitor and inductor cause slight variations in the operating frequency, which reduces the likelihood of crosstalk with other Tesoro machines. The variation is small enough that it does not affect the performance of the detector.

Are multi-frequency detectors better than single frequency types?

The tank circuit described above generates a sinusoidal or SINE wave form. The SINE wave is efficient to generate and has no harmonics.

Two frequency machines may combine a pair of SINE waves but are more likely to use a square wave. Multi-frequency machines almost always use a square wave or modified square wave. Square waves are rich in harmonics and take more battery power to generate. Harmonics generated by a square wave can be counted as individual frequencies and can be used to give more information as to target type and depth.

 

COILS

What is the difference between a wading coil and a regular coil?

When hunting in water, most coils tend to float. As customers want lighter and lighter coils, most manufacturers will fill coils with some type of foam or other lightweight hollow material. This naturally creates air pockets inside the coils and tends to make them float.

A wading coil is filled with one or more materials that have neutral buoyancy when placed in water. This keeps the coils from either floating or sinking and makes water hunting easier for the detectorist.

Are aftermarket “Hot” coils that are advertised any good and why don’t the manufacturers make them?

If you look closely at the advertisements of most so-called hot coils, you will find that they are slightly larger than the stock coils that they are replacing. As noted above, a larger coil may go deeper, but it has other drawbacks that may make it unsuitable for your particular style of hunting. Most manufacturers already make coils that are larger than the stock coils. These coils are specifically designed by the company engineer to match the circuitry of the particular unit that you are using. Why would you want to buy a coil that is not designed or built by the manufacturer?

 

OPERATION

How deep do detectors go?

The answer to this question comes in two parts. The first part has to do with the detector circuitry and coil design. Environmental factors make up the second part of the answer.

Coil and circuitry design determine the overall ability of a detector to find targets. During the design phase of any detector, the engineers decide which features to include. The things that they consider are the type of hunting and who will be using it. A beginner’s model may not have the bells and whistles of the more professional models, but it will be easier to use. The more specific a detector’s design, the narrower set of features it will have. Some detectors designed for the ultimate depth will be hard for a beginner to use or may be too sensitive to use in trashy areas. Coil size will affect the depth of the detector but may not be suited for a particular type of hunting.

Environmental factors include just about everything except the detector and coil. Just a few of the things to take into consideration are the following: size and shape of the target, soil conditions, orientation of the target in the ground, content of the target, and any outside interference, such as electrical wires and radio or cell phone traffic. Weather conditions, such as rain-soaked ground or even an incoming thunderstorm, may also play a part in the depth and sensitivity of any detector.

With all that being said, an average detector using a stock coil in moderate ground should see the following targets with these ranges:

Target size Depth
Dime to nickel: 4 to 8 inches
Quarter to half dollar: 6 to 12 inches
Dollar to fruit jar lid: 8 to 16 inches

Knowing your detector and using it properly are the two most important things that you can do to get the best depth and sensitivity out of any machine.

How do you set up and use a metal detector?

Whenever you are using a detector, comfort should be your primary goal. A detector that is easy and comfortable to use allows you to be in the field longer and to find more targets.

The shaft of the detector should be adjusted so that the searchcoil is just off the ground when your arm is in a natural and relaxed position. Your hand should be lightly on the grip and your elbow straight but not locked. This initial setup allows you to swing the detector with an easy shoulder movement. The coil should move in an approximate three foot arc in front of you. This is called the sweep. While sweeping your coil, try to avoid swinging from the elbow.

How do I know where to dig?

Once your detector beeps, you have to pinpoint your target. Pinpointing your target is a skill that is very important to practice and learn. The faster that you can locate your target, the more time you can spend searching for treasure. The technique for pinpointing varies depending on the type of coil that you are using. But the basics are the same.

“Xing” the target with your coil is the most common type of pinpointing. To “X” a target, run your coil over the target and make a mental note of where the audio signal is the loudest. Start with your normal right to left sweep to find the loudest audio signal. You should shorten your normal sweep down to about two to four inches. Once you have a good idea of where the target is, run the coil 90 degrees over the target to tighten up the pinpointing. You can do this one of two ways. First, you can physically step to the left or right of the target so that the coil goes over the object using a normal sweep but turned 90 degrees. Second, instead of stepping to the side and sweeping the coil left to right, you can push and pull the coil forward and backward over the target. Try using both methods to find the one that works best for you.

Pinpointing with a concentric coil: Most coin and relic machines use a concentric coil. These types of coils pinpoint in the physical center of the coil housing. Most concentric coils will have a hole in the center of the coil so it is easier to make the mental note of the location of the target.

Pinpointing with a widescan or double-D coil: The widescan coil is slightly different from the concentric coil. By design, there is no center spot on the coil but a center strip of pinpointing area. The best pinpointing method is to use the very front of the coil or toe or the very rear portion or heel of the coil. Once you have gotten the signal, back the coil away from the target and use the toe of the coil to find the best signal. Pinpoint in the usual manner after that. To use the heel of the coil, push the coil past the target and use the end of the coil closest to you for the pinpointing.

Regardless of the type of coil or the pinpointing method that you feel most comfortable with, practice will make you a better pinpointer and save you time and effort in the field. How much discrimination should I use?

In the late sixties and early seventies, as metal detectors became more popular, most of them on the market were all metal machines and could not discriminate any junk targets. As detectors became more sophisticated, the ability for discrimination got better and better. Now coin hunters can knock out the junk targets and keep the good ones in, or so they thought.

Metal detectors judge targets based on their conductivity. Iron and silver targets are easy to separate because they are on opposite ends of the conductivity scales. However, the real struggle comes in the area of nickels, pulltabs, and gold rings. All of these targets are in the same area on the conductivity scale and can change due to the size, shape, and alloy of the target.

For most coin and relic hunting situations, I recommend a setting just high enough to knock out the iron and foil. This allows you to get all of the other valuable targets without fear of having them discriminated out.

What is Notch Filter Discriminate and how does it work?

Notch discriminate differs quite a bit from regular discrimination. When using standard discrimination, the higher the knob is turned up, the more items that are discriminated out. As discussed before, when pulltabs are totally discriminated out, so are gold jewelry, rings, and nickels. Notch filter discriminate is designed to knock out some pulltabs and to keep the good targets in. It is virtually impossible to knock out all pulltabs and keep all gold jewelry. The reason is due to the conductivity of the targets in this range.

A notch discriminate works by filtering or discriminating a band of target signals out without affecting targets higher or lower than the band. This can be done either with an analog or digital circuit.

When using a notch filter, check the setup by doing numerous air tests before taking it out to the field. It is to your advantage to make sure you are aware of how your detector reacts to both good and junk targets. If your Notch can be adjusted, tune it to knock out the most common types of pulltabs in your area while keeping in the targets you wish to find. The initial setup can be a bit time consuming, but once it is done, you will be able to find less junk targets and keep the good finds.

Can iron be rejected and gold nuggets still be found?

Generally speaking, the best way to hunt for gold nuggets is to hunt in the All Metal mode. Nuggets, depending on their size, shape, purity, and orientation in the ground, will all create different signals. If you hunt in the Discriminate mode, some nuggets may be lost. The best way to get rid of iron is to search in the All Metal mode and then check the targets in the Discriminate mode. This allows you to search and find all of the possible gold nuggets. Checking the targets with the Discriminate mode turned up just high enough to knock out the small iron will give you much more information before you decide to dig. Practice this by doing air tests to see the best setting for your particular detector.

My detector still finds large iron targets, even with the Discriminate set high. Is this normal?

Most detectors can be fooled by some iron targets. There are two different ways that the machine can be fooled.

Circular iron can fool a detector because of its shape. Any iron, such as a ring or washer or even bent nails, are hard for the machine to identify accurately. As the iron starts under the coil, it gives the same type of signal as a coin. When the target is directly under the coil, it reads as iron, then reads as a coin as the coil sweeps over it. In most cases, the detector may give a signal, but it will be a broken or chirpy signal. With a little practice, the broken signals will start to stand out from good repeatable signals.

Large rusty iron can also give off signals no matter where the discrimination is set. When iron or any ferrous target is in the ground long enough, it starts to rust and break down. This causes a large halo of super mineralized dirt around the target. The halo is different enough from the surrounding ground matrix that the detector picks up a signal. The strength of the signal is so large that it momentarily overdrives the detector and it beeps. Signals of this nature usually seem bigger than the size of the coil.

The best thing to do when getting either a broken signal or a very large signal is to dig the target. Most of the time, it will probably be junk, but every now and then, you will be happily surprised by a very unique target.

Why do some pennies read differently than others?

The big difference is in the makeup of the actual penny itself. Older pennies, ones made before 1982, including the wheatback-style, are almost pure copper and will read up in the range of dimes and some other silver coins. The newer pennies are made mostly of zinc and tend to read in the screwcap range.

What is the best frequency for my type of hunting?

Contrary to popular belief, there is no one best frequency for any specific metal or metals. Any VLF-style detector that is operating between 3 and 30 kHz will do a fine job for any type of hunting that is done. This frequency range gives good depth, target separation, and is not overly affected by ground mineralization.

The ability to pick up good targets and separate trash from goodies is more due to the design of the detector, type of coils used, and several other engineering points that are brought up during the R&D phase. Comparing feature points of the detector model to the type of hunting you are planning to use it for will help you more than just comparing frequencies.

What is “crosstalk” and how can I avoid it?

Crosstalk is the interference that is caused by two detectors operating on the same frequency being in close proximity to each other. Depending on the gain and signal strength of the detectors, crosstalk can happen anywhere from 3 to 15 feet of the two detectors.

Crosstalk is most annoying when at a seeded treasure hunt. When you have a field with 50 to 100 or more hunters in it, you are bound to get at least one detector that is close enough to your frequency to cause crosstalk. Most manufacturers offer some sort of frequency shifter for coin hunt situations.

Frequency shifters change the transmit and receive signals just slightly enough to keep another detector from interfering with yours.

How much does the moisture in the ground have to do with detection depth?

Moisture in the ground by itself has very little affect on the operation of a metal detector. Fresh water, such as rain or irrigation, is not much more conductive than the dirt it soaks into. Most metallic items in moist soil will start to corrode. As these items start to break down, they create a halo of super mineralized soil around the target. The halo effect makes the target appear bigger to the metal detector. Iron and other ferrous targets will corrode faster than other targets. Gold does not corrode, and silver, copper, and brass corrode more slowly than iron. So, while the halo effect will work on some targets, it will not work on all.

Saltwater is a little different than freshwater. Due to its nature, saltwater is more conductive than fresh. This may give a little extra punch down into the ground but will also cause most machines to chirp and chatter quite a bit more. It is especially bad at the surfline on a wet saltwater beach. You can effectively tune out most saltwater effects when the saltwater is consistent (when the coil is covered by a foot or so of water, for example). Along the surfline, the waves are still washing up on the shore and the sand is drying out. This causes pockets of sand that may be higher or lower in conductivity than the surrounding area and can play havoc on your detector. It is best to hunt in the Discrimination mode with the Discrim-ination knob turned up high enough to knock out iron and foil. This will cancel out a good portion of the saltwater effects. You may also have to turn down your sensitivity to stabilize the detector.

 

HEADPHONES

What are the best headphones to use?

Every detectorist has a slightly different style and likes a different type of headphone. For each style of hunter and hunting, there are several headphones.

The most obvious difference is the earpiece. A lot of detectorists like the full-cup style. These phones fit completely over your ear and block out most of the background noise. They work well for when you are trying to hear the faintest of signals. The downside is that if it blocks out the surroundings, you may not hear snakes or other predators around you.

On the other end of the scale are walkman or earbud-style headphones. They will concentrate the signal in your ear but will allow you to hear the surroundings around you as well. Earbuds are also much cooler to wear during the hot summer months.

Along with the types of cups are the ohm ratings and frequency ratings to consider. Headphones that are designed for listening to digital music have very high ohm and frequency ratings. They will allow you to hear greater nuances in the detector signals but are very expensive. Lower-priced headphones may not have the range of their higher-priced brothers, but considering that you are only listening for a beep, they work very well. If you are out in the field and accidentally break your phones, the inexpensive ones are much easier on the pocketbook.

There are a number of headphones that have active electronics inside them as well. Most of these types of phones have some form of compression/limiter circuit in them. They work by amplifying weak signals and limiting the strong ones. They will work well for chasing some of those elusive small, deep targets but may make shallow and deep target signals sound the same.

With all of the headphone choices out there, try as many as you can, think about the type of hunting that you do, and where you will be doing it. When you consider all of these factors, you will find the headphones that work best for you and your detecting style.

How much will using headphones increase the battery life?

Headphones take much less current to drive than the speaker in the detector. This fact by itself would tend to show that you will increase your battery life by using headphones. But you have to remember that even though the detector is not making any noises, the electronic circuits are still running. A detector that generates a square wave or has a display will be using more power than a detector that is using a sinusoidal wave and has no display. The increase in battery life will depend on your detector and hunting style.

 

BATTERIES

Are rechargeable batteries better than alkalines?

There are two aspects of rechargeable batteries to consider. The first is cost. Rechargeables are quite a bit more expensive than regular batteries, but the cost is offset so that you will not have to buy them as often.

The second consideration for rechargeable batteries is the voltage. Most rechargeables have slightly lower voltage than their counterparts. Alkaline batteries have a voltage of 1.5 volts per AA cell. Most rechargeable batteries have a voltage of around 1.2 volts per AA cell. If your detector uses 8 AAs, you will have 12 volts with the alkalines and roughly 9.6 volts with the rechargeables. This should not affect your depth and sensitivity, it but will affect the time that you are able to hunt.

 

LAST BUT NOT LEAST

Are there any good places left to hunt?

Most places that come easily to mind have probably been hunted to death. If you thought of that site, chances are someone else has thought about it as well.

Doing research is the best way to find new places to hunt. Every city has some form of museum or historical society. This is a great place to start.

Joining a local treasure-hunting club can help as well. Check with your local dealer to see if there is a club near you. You may also want to contact a national club such as the “Federation of Metal Detector and Archaeological Clubs,” “American Metal Detecting Association,” or the “Gold Prospectors Association of America.” A national organization will have several local groups that will allow you to contact hunters that share the same interests as you do.

 

How do I set my Sensitivity control to get maximum depth?

The Sensitivity control on most detectors is used to set the trigger point of any signal. The higher the Sensitivity setting, the smaller amount of signal a target needs to produce to have the detector give an audio signal. A very small or very deep target will not produce the amount of signal that a large or shallow target will. By increasing the sensitivity, the machine will give an audio signal to the smaller and deeper targets, but the detector may become too sensitive and start picking up ground effect or outside interference such as electrical lines or radio frequency noise.

The easiest way to set your Sensitivity is to turn it up until the machine starts to chatter. When the machine chatters, turn the Sensitivity control back until the chatter just goes away. This will give you the maximum sensitivity without any excess noise. If you can turn your Sensitivity control wide open without chatter, leave it there. Your machine will be operating at its maximum power capabilities.

What is ground balancing?

Ground balance is a form of discrimination that cancels out the effect of mineralization. Ground balancing is the physical act of finding the balance point where the effects of the ground are neither too positive nor too negative. When a detector is set with a positive ground balance, it will react to the mineralization matrix just like a target. When this happens, you will get an audio signal and targets in the ground will be masked by the mineralization. If a detector has been set up with a negative ground balance, the detector is discriminating out the ground and will go silent. A severe loss of depth and sensitivity are the results.

Finding the balance point between these two extremes is very important for the best operation of any machine. Most factory preset detectors are set just slightly positive. This will allow the user to work different types of soil conditions. A slight positive setting will also keep the detector from reading small ripples in the dirt and the hole you are digging to retrieve a target.

What is the difference between Preset, Manual, and Automatic Ground Balance?

All VLF-style metal detectors have some form of ground balance or mineral rejection. This keeps the detector working as close to its peak as possible and not be affected by mineral masking. When reading literature on all of the detectors, it can be confusing as to what the detector is actually doing.

Factory preset is the most common type of ground balance. It is used on most machines that are called “turn-on-and-go.” The ground balance is set internally by a technician at the factory. It will work fine for most coin, jewelry, and relic hunting needs almost anywhere in the world. Factory preset does not require the user to do anything to set the ground balance.

Manual ground balance is used on detectors designed to work in highly mineralized conditions. The ground balance is set by the user and is tuned to the local ground conditions. In bad ground, a manual ground balance can give you better depth and sensitivity than a factory preset. Unfortunately, if the ground balance is set incorrectly, a loss of depth and sensitivity will result. When working with a manual ground balance, constant attention is a must. If the ground conditions change, the detector must be retuned to the ground matrix to ensure the best operation of the machine. Manual ground balancing is a learned skill and must be practiced for best results.

While manual and preset ground balance are pretty clear, automatic ground balance causes some confusion. In the earlier days of metal detecting, any machine that was not a manual ground balance was referred to as an automatic ground balance. The term was used because the detectorist did not have to tune the machine; it was “automatic.” In the late 80s, several detectors were introduced that had microprocessor controlled ground balance. That is to say that the detector sensed the ground condition and reacted to change by adjusting an internal electronic potentiometer. True automatic ground balancing had arrived. Some manufacturers and dealers still use the automatic title for factory preset machines. If you have a question about whether or not any detector is truly an automatic ground balance or not, check the machine with a mineral sample. If the machine actively tunes to the sample, it is an automatic.

What is the best type of ground balance?

This is another question that involves an honest evaluation of your detecting needs. Most detectorists who hunt a few hours here and there for fun or those who are novices would probably benefit from a preset type of machine. There are fewer knobs to worry about and the setup time is very short. This means more time swinging the coil and more chances of finding targets.The more advanced detectorist or one who is hunting in very mineralized soil (gold prospecting or relic hunting) should get some form of adjustable ground balance. Manual ground balance is good for the avid hunter who wants to be able to tune the detector to his exact specifications. Depending on ground conditions and personal hunting habits, a slightly positive or negative ground balance can help the detectorist find targets. An automatic ground balance will always tune to its programmed parameters and can’t be fine tuned to the user’s specifications.Matching your detecting style and hunting habits to the type of ground balance of the detector will result in better finds.

How do I set up a manually adjusted ground balance detector?

Most manually adjusted machines are easy to set up, once you have practiced the skill necessary. Start with the machine in the All Metal mode with the Threshold hum set low and steady. Lift the coil straight off the ground and allow the threshold to retune. Do not swing the coil in an arc off the ground. Moving the coil in an arc causes the machine to read the ground in an uneven manner and will complicate the ground balance procedure. Once the threshold has retuned, push the coil down to about one inch above the ground. One of three things will happen. The threshold noise will get louder; it will get quieter; it will stay the same. When the threshold sound stays the same, the detector is telling you that it is no longer being affected by the mineralization in the ground and you are ready to hunt. If the sound gets louder, you will need to turn the ground balance knob counterclockwise. If the sound gets quieter, turn the ground balance knob clockwise. Repeat the above steps until you find the spot where the detector no longer reacts to the ground and the threshold hum stays the same on the way down.

If you have a manually adjusted machine, it is very important to make sure that you are very comfortable setting the ground balance. You can practice this in your backyard or anywhere you can find a small area with no metal targets in the ground. Spinning the knob one way and setting the balance, then spinning it the other and resetting the balance is a good way to practice this skill. If you practice this just five minutes a day, you will get very good at ground balancing.

What is Super Tune?

Super Tuning is a technique to get better depth and sensitivity out of any machine that has an adjustable Threshold control.

The Threshold control is normally used to set the level of hum in the All Metal mode. A light steady hum is usually desired so that any small or deep target will cause a change in the audio sound. To Super Tune a detector, put it in the Discriminate mode and turn the Threshold knob all the way to the clockwise position. At this point, the All Metal mode will no longer operate correctly, but you will see an increase in depth and sensitivity while hunting in the Discriminate mode.

What is High Output Technology?

Most metal detectors work by sending out a signal, receiving it back, amplifying the return signal, and deciding whether or not to beep. One way of making the detector more sensitive is to increase the amplification of the return signal. This works well up to a point but can cause a machine to overload the circuits and become chirpy. Another way is to increase the initial signal going out, but once again, too much power and the signal will become unstable.

High Output Technology combines the increased transmitted signal and the high gain amplification of the return signal to get the best depth and sensitivity out of our lightweight, compact detectors. When a detector becomes chirpy, the most common reason is the noise to signal ratio. Signal refers to the information being passed through the circuitry and noise is any type of other interference. As the signal is amplified, the noise gets amplified as well. At Tesoro, we use high tolerance components and design them into the circuit to create a lower noise to signal ratio.

What is Target ID and how does it work?

Target ID is a feature that will give the metal detectorist more information about the target while it is still in the ground. It cannot tell you exactly what the target is due to the many variables present in an unknown target. A short list of these variables are as follows: the metal content of the target, the size and shape of the target, the target’s orientation in the ground, the mineralization matrix of the ground itself, depth of the target, detector settings, and outside interference such as weather conditions, cell phone traffic, and electrical lines. All of these things can cause changes in the meter readings.

A basic detector works by transmitting a signal and receiving it back. This creates a field of electromagnetic flux lines around the coil. As metal passes through the field, it breaks or distorts the flux lines. A simple discrimination circuit measures the amount of distortion or shift and beeps or doesn’t beep based on the settings of the machine. During the design phase of any metered-style machine, the engineer measures the amount of shift that the most common targets cause and programs a microprocessor to respond with a meter reading for those types of shifts. The testing can include simple air tests, field tests in a controlled environment, such as a test garden, or even complex reports from several different field testers. But at some point, someone decides that a type of target shift represents a specific meter reading. While this information can give a detectorist a basis to dig or reject a target, it is in no way perfect.

Is there a way that I can get more target information from a non-metered machine?

There is an easy way to find out more information about any target while it is still in the ground. When you get a target, shorten your sweep to about two to four inches over the target. As you move the coil over the target, slowly turn up the Discriminate knob. Check to see where the target goes away. Most detectors now have icons on the discriminate control representing the targets knocked out. This gives you the ability to make better decisions about digging any given target.

The best way to start practicing this method is to do several air tests and see how your detector responds. When you have a good feel for what your detector is telling you, try it in the field. For the first couple of months, check the target with your Discriminate and see if you can identify the target. Dig every target and verify how correct you are. After a while, you will become very good at identifying targets while they are still in the ground. You will dig less junk and be a more successful treasure hunter.

If you choose to use this method, always remember to turn your Discrim-inate knob back to the low setting before continuing to hunt.

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

metal detector terms

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

metal detector terms

DetectionNet : A website for Metal Detectors

Audio ID: See Tone ID. Audio Response: See Target Response.Air Test:  A test performed by moving various sized metal samples beneath the metal detector search coil to check the metal detector’s features and target response.  This test is not an accurate indicator of ground depth penetration capability.Alkaline: A type of battery able to sustain longer periods of current drain with greater storage life when compared to the standard carbon-zinc type.

All Metal: Any operating mode or control setting which allows total acceptance of any type of metal targets. Usually associated with the Ground Balance mode.Auto Tune: Circuitry which continuously retunes the detector’s threshold to the initial manually tuned audio level. The retuning rate following target rejection or drift can be preset or variable.Back Reading: A false signal, when operating in the discriminate mode, caused by a rejected target coming within one inch of or contacting the searchcoil bottom.Bench Test An air test to determine at what approximate discriminate settings various metal samples are rejected or accepted. The test is conducted in a non- metallic area.Black Sand One of the most extreme components of nonconductive, negative ground minerals. Also called magnetite (Fe304) or magnetic iron oxide.

Body Mount: A configuration whereby the control housing is separated from the control shaft and fastened to the operator’s body lessening arm fatigue and expanding usability for shallow water hunting. Also known as hip mount.

Cache: Any intentionally buried or secret hoard of valuables.

Carbon-Zinc: The most common standard dry cell battery type.Coil: See Searchcoil.Coin Depth Indicator: A visual indicator used in conjunction with calibrated circuitry to indicate depth of buried coins in inches or millimeters.Concentric: A searchcoil configuration using one or more transmit and one receive windings having unequal diameters aligned on a common center; most recently arranged on the same plane and called coplanar concentric.Conductive Salts: One of the major mineral types which make up the positive ground matrix. Wet, ocean-salt sand produces a positive rise or metallic type response on an air tuned threshold.Conductivity: The measure of a metal target’s ability to allow eddy current generation on its surface.Control Housing: A metal or plastic box which holds circuit boards, indicators, meter, controls and power supply.

Convertible/Combination: A metal detector configuration allowing versatility in operator handling, i.e., hand held to body mount.

Coplanar: Any searchcoil configuration in which transmit and receive windings occupy the same level or plane.

Crystal Controlled Oscillator: A transmit oscillator employing a crystal to maintain stable output frequency.Depth Penetration: The greatest measure of metal detector’s ability to transmit an electromagnetic field into the soil matrix and produce a target signal.

Detection Pattern: The densest or strongest region of the searchcoil’s electromagnetic field where detection occurs. Its shape is balloon and changes in size directly proportional to target surface area.Detuning: Adjusting the audio threshold into the null or less sensitivity tuning zone. Also a method of narrowing a target signal width manually for precise pinpointing. This is accomplished by retuning to audio threshold over the target response area.

DISC: See Discrimination.

Discrimination: Adjustable circuitry which ignores or nulls audio responses from a specific conductivity range allowing positive responses to be heard from metals higher in conductivity above the discriminate control setting. Designed primarily to eliminate audio response from trash metals. See also Motion Discriminator.

Drift: A loss of threshold tuning stability caused by temperature change, battery condition, ground mineral content or detector design.Double Blip: A signal characteristic common to elongated ferrous targets such as nails or coins lying close to the surface detected in the All Metal no-motion mode.Double D or 2 D: See Wide Scan.

Eddy Currents: Small circulating currents produced on the surface of metal by the transmitted electromagnetic field. These currents then produce a secondary electromagnetic field which is then detected by the search coil receiver windings resulting in inductive imbalance between the windings.

Electromagnetic Field: An invisible force extending from top and bottom of the searchcoil created by the flow of alternating oscillator frequency current around the transmit winding. See also Detection Pattern.

Electronic Pinpointing: An automated detuning feature which narrows signal response for the purpose of target pinpointing. Elliptical Coil: A searchcoil with an ellipse shape. This coil can be either concentric or widescan type.Faint Signal: A sound characteristic of targets that are sometimes deeply buried or very small in size.False Signal: An erroneous signal created by over shoot, ground voids or highly mineralized hot rocks. See also Back-Reading.Faraday-Shield: A metal foil wrapping of the searchcoil windings or metallically painted searchcoil housing interior for the purpose of eliminating electrostatic interference caused by wet vegetation.Ferrous: Descriptive of any iron or iron bearing material.

Ferrous Oxide: An oxidized particle of iron which generally becomes nonconductive and makes up the natural negative ground mineral matrix. Hematite, which is also iron oxide (Fe203) will respond as positive or metallic. See also Black Sand.

Frequency: The number of complete alternating current cycles produced by the transmit oscillator per second. Measured in cycles per second. VLF Very Low Frequency = 3 to 30 kHz; LF Low Frequency = 30 to 300 kHz;MF Medium Frequency = 300 to 3000 kHz; HF High Frequency = 3 to 30 MHz.

Frequency Shift: A feature which suppresses the audio interference (cross-talk) between two detectors using identical transmit frequencies in close proximity.

Ground Balance: A state of operation using specialized circuitry to ignore the masking effect that iron ground minerals have over metal targets.

Ground Balance – Factory Preset: A feature which eliminates the manual ground balance control and its adjustment from the operator’s setup procedure. This adjustment is performed internally by the factory to optimize operation over an average range of nonconductive soils.

Ground Balance – Manual Adjusted: A feature requiring a manual control adjustment procedure to neutralize the effects of negative minerals in the search matrix.

Ground Balance – Self Adjusting: A feature which senses change in ground mineral content and continuously readjusts the ground balance while in operation. Sometimes called Ground Tracking or Automatic Ground Balance.

Ground Filter: Complex circuitry found in motion-type detectors which separates mineral signal from the metal signal allowing it to be further processed by the discrimination circuitry.

Hand Held: A metal detector configuration whereby the operator holds a shaft or handle which supports the searchcoil and control housing. Also called pole mount.

Head: See Searchcoil.

Hz or Hertz: Cycles per second. See also Frequency.

Hip Mount: See Body Mount.

Hot Rock: A rock which contains a higher concentration of nonconductive ground minerals than the surrounding matrix to which the detector is balanced. A metallic (positive) response will be heard in the motion and non-motion modes and a null or negative drop in threshold is heard in the all-metal, ground balance mode over these rocks.

Isolator: A nonmetal stem which attaches the searchcoil to the control shaft eliminating metallic interference in the detection pattern. On some detectors, the entire lower shaft is made of a nonmetal substance.

kHz or Kilohertz: 1000 cycles per second. See also Frequency.

LCD or Liquid Crystal Display: Used on a metal detector as a graphic visual indicator same as a meter/needle indicator.

LED or Light Emitting Diode: A semiconductor which produces an illuminated visual response.

Loop: See Searchcoil.

Matrix: Refers to the total volume of ground penetrated by the transmitted electromagnetic field, which may contain varying amounts and combinations of minerals, metals, salts and moisture.

Metal: Metallic substances such as iron, foil, nickel, aluminum, gold, brass, lead, copper, silver, etc.

Metal Detectorist: A person operating a metal detector in the field. This name is preferred by many over Treasure Hunter.

Meter: A detector component that provides visual information to aid in target identification. Meters feature either an LCD or needle indicator which may display intensity of signal, target depth, target identification, type of metal, or battery condition.

Mineral-Free Discriminator: Any metal detector that can reject or ignore trash metals while simultaneously balancing ground mineralization.

Mineralized Ground: Any soil that contains conductive or nonconductive components.

Mode: A condition of operation, selected by the operator, for specific desired function(s).

Motion Discriminator: A detector type that requires searchcoil motion to activate its simultaneous ground balance and discriminate functions. See also Mineral-Free Discriminator and VLF/TR.

Narrow Response: A target that produces an audio response so short that pinpointing is almost not needed.

Negative Ground: Soil that contains non-conductive minerals which have a negative or nulling effect on an air-tuned threshold.

Neutral Ground: Soil that has no nonconductive or conductive mineral properties. Lacks mineralization.

Ni-Cad or Nickel-Cadmium: A rechargeable type of battery cell.

Non-Ferrous: Not of iron. Metals of the precious class (i.e., gold, silver, copper, etc.)

No-Motion: Refers to any mode of operation that does not require searchcoil motion to trigger target response. Also called non-motion.

Notch Accept: Operation whereby all target responses are “tuned-out” except those the instrument is adjusted to accept in the notch “window.”

Notch Discrimination: Filtering circuitry which allows a “window” of desirable targets to be accepted within the entire rejection range of unaccepted targets, i.e., rejecting nails, foil and pulltabs while accepting nickels and gold rings of the same conductivity. This circuitry can also be adjusted to reject all metal targets while accepting only a specific conductivity range.

Notch Level: A control used to select the target level or target conductivity which the notch filter will act upon.

Notch Reject: Operation whereby all targets within the notch width at chosen notch level will be “tuned-out.”

Notch Width: A finite discrimination range of target conductivities (“window”) at the chosen notch level.

Null: The zone just below audible threshold in metal detector tuning. This also refers to the momentary drop or quiet response of threshold sound as the searchcoil passes over a discriminated or rejected target.

Overlap: The amount of searchcoil swing advance not greater than the searchcoil’s physical diameter.

Overshoot: A common false signal heard as the searchcoil passes over a rejected target when using a no-motion All Metal mode in conjunction with automatic retuning. Excessive tuning restoration pushes the audio above threshold level creating a positive response at the edges of target detection periphery.

Phase Response: The length of time between eddy current generation sustained on a metal’s surface and the resultant secondary electromagnetic field effect on the searchcoil’s receive winding. Related to target conductivity.

Pinpointing: Finding the exact target location with respect to a searchcoil’s designated center. Accomplished by interpreting the centers of audio response width in perpendicular directions or scans. See also Detuning.

Positive Ground: Soil which contains conductive minerals or moist salts which have a positive or upward effect on an air-tuned threshold.

PI or Pulse Induction: A mode of operation where the transmitter circuit pulses an electrical current into the ground be fore it quickly shuts down. The eddy cur rents dissipate immediately from poor conductors such as wet salt sand and ground minerals. Metals hold eddy cur rents because they are better conductors. When the receiver circuit comes on, it picks up the returning signal from metal; the eddy currents in the ground minerals have already disappeared.

Quick Response: A short time period between metal sensing and peak audio/ visual indicator indication usually associated with all frequency ranges of TR detectors.

Rejection: An indication of target nonacceptance by a null in threshold or broken sound while operating in a discriminate mode.

RF-Two Box: A radio frequency detector having its own transmit and receive windings separate and in an orthogonal configuration. This detector is capable of deep large object detection while naturally ignoring small targets such as nails and individual coins.

Scan: Refers to 1) the effective searchcoil detection width or 2) searchcoil movement over the ground.

Scrubbing: The searchcoil is pressed and held in contact with the ground while searching to maintain even audio threshold. With newer detectors, this technique is used to gain depth.

Searchcoil: A circular (or other shaped) plastic housing containing single or multiple transmit and receive windings (wire coils) in a specific configuration. A searchcoil emits and receives signals from the ground and metal targets. Also called loop, coil or head.

Searchcoil Cable: An electrostatically shielded cable of conductors (wires) which convey signals to and from the searchcoil and control housing.

Sensitivity: The capacity of a metal detector to perceive changes in conductivity within the detection pattern. Generally, the more sensitivity a detector can smoothly provide, the more depth it will achieve in sensing targets.

Signal: An audio response or visual indication alerting the operator that a target has been detected.

Signal Width: The total distance of ground an audio signal is sustained during search- coil travel or scan.

Silent Search: Refers to detectors capable of producing a target signal while operating below the threshold audio. Also called silent operation.

Scuff Cover: A protective cover for the searchcoil bottom. Also called coil cover or skid plate.

Slow Motion: A description of searchcoil speed required to operate the motion discriminate mode.

Stability: The ability of a metal detector to maintain manually adjusted tuning thresh- old under the effects of outside interference. See also Drift.

Surface Area: Refers to the area of a target closest to the searchcoil where eddy current generation can take place.

Surface Mount: The art of mounting electronic components on the surface of a printed circuit board rather than using the “through board” method. This allows more technology in a much smaller space and with much higher tolerances.

Sweep: The motion employed in moving the searchcoil across the ground.

Target: Refers to any object that causes an audio or visual response in a detector.

Target Masking: When large sizes or high concentrations of trash metals drive the threshold into the null zone suppressing weaker, positive responses from deeper or smaller targets.

Target Response: See Signal.

Ten-Turn: A control which can be manually rotated ten times to cover the full electrical range of the function. Usually associated with tuning or ground balance function.

Test Garden: A mapped plot of buried targets at various depths to aid in learning characteristic target responses and in comparing metal detector performances under a given ground mineral content. Also called test plot or test bed.

TH’er,TH’ing: Universal word contractions for treasure hunter and treasure hunting. Also known as Metal Detectorist.

Threshold: Continuous tone that establishes a reference point for tuning the detector to ground balance it. The threshold tone also establishes the minimum sound level for deep targets in the discriminate mode.

Tone ID: Circuitry producing different audio tones for each target’s conductivity range, i.e., low tone for nickel, high tone for coins.

TR or Transmitter-Receiver: Term describing method of operation of early detectors. Some manufacturers still produce this type of detector. Electromagnetic field distortion caused by mineralized ground interferes with depth penetration as this type of detector does not ground compensate. It does balance conductive salt water effects so, it is primarily used in salt water and on low mineral salt water beaches or low mineral inland locations.

Visual ID: A feature in which a visual indication is produced to help identify the target.

Visual Indicator: A meter, LCD or LED that signals a target’s presence.

VLF or Very Low Frequency: See Frequency.

VLF/DISC: Term associated with detectors capable of mineral-free operation in both the Discriminate and All Metal modes.

VLF/TR: A class of detector that can operate in both the All Metal, Ground Balance mode and the No-Motion Discriminate, Non-Ground Balance mode.

Wide Response: A target that produces an audio signal over an area wider than the searchcoil diameter.

Wide Scan: A coplanar searchcoil with two “D” shaped transmit and receive windings positioned back to back and overlapping. This searchcoil type is capable of detecting a target across at least its full diameter. Also called Double-D or 2-D.

Zero Discrimination: Used to describe detectors whose discrimination control allows the acceptance of all metals at zero setting.

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

Garrett Metal Detectors and Tesoro Metal Detectors for treasure hunting

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page

Tesoro and Garrett Metal Detectors are fun to use. You can Join in on the fun sport of treasure hunting with the purchase of a quality metal detectors. Both Garrett Metal Detectors and Tesoro metal detectors metal detectors are available and the best quality products. It is guaranteed  that all of these products are durable, effective and within the price range of the average consumer. Using one of these products is sure to help you find any hidden metals, regardless of whether the product is used recreationally,professionally or in search of profit.The metal detectors available for sale are of a variety of grades and are built for a variety of purposes,meaning that regardless of your goals, you are sure to find a product that is appropriate for your project.Many of the products available for purchase are models that have been used by professionals, which really shows the quality of both Garrett metal detectors and Fisher metal detectors. From military grade products, which are used to detect explosives on battlefields, to metal detectors used to uncover historical relics, these products are tried and true. Additionally, even if you are looking for a very specific type of metal detector, you are sure to find what you are seeking. Not only is there a vast wealth of products to choose from, but there is also a variety of accessories that are available for purchase. Whether you require a specialized grip, a certain output device or another form of customization, you are sure to find the appropriate product in this selection.Professionals and hobbyists alike find the best metal detectors available within this selection. Regardless of whether you need a hardcore product for heavy duty work or a light and effective product for a family camping trip, Garrett metal detectors and Fisher metal detectors are great choices. View the gallery today and get started on with these exciting products
Back to Detection.com

 

Don't be shellfish...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInDigg thisShare on StumbleUponBuffer this pageFlattr the authorShare on RedditShare on TumblrPin on PinterestEmail this to someonePrint this page