more metal detector and detecting terms

metal detector terms

Target ID Cursor A graphical indication of the target’s probable identity (e.g. coin, gold, pull tab) based on its electrical properties


All-Metal Mode A metal detector setting  that detects all metal objects, no discrimination
Volume Control The ability to adjust the loudness of the audible response produced by the detection of a target
Audio Threshold The background audio level produced when no target is being detected – it is best to adjust the audio threshold to the lowest audible level, and recommended the operator use headphones when treasure hunting
Audio Tone The pitch or frequency of the sound made by a detector. The tone on the GTI 2500, 1500 and GTP 1350 detectors can be adjusted on a treble to bass scale.
Cache Larger deposits of treasure that generally consist of money and valuable objects
Classifier A filtering device, typically found at the head of a sluice, which helps prevent rocks and other large debris from falling into a gold pan.
Coin Shooting Hunting for coins regardless of location o r era of coins targeted
Composite Digger Trowel made of durable plastic that  helps prevent coin damage during recovery. Ideal for  soft terrain
Control Box Contains the detector’s main circuitry, controls, speaker, batteries and microprocessor chip
DD Searchcoil A special configuration of the transmit and receive coils to minimize the effects of ground minerals
DSP (Digital Signal A highly advanced computer chip used in Garrett detectors and other sophisticated Processor) electronic  equipment
Discrimination The ability of a metal detector to reject a target , such as a pull tab and foil or accept a target such as a coin or jewelry based on its metallic composition
FastTrack (See Garrett’s exclusive technology that analyzes ground mineralization and adjusts to “cancel” Ground Balance) its effects in a matter of seconds
Frequency The number of times per second the energy transmitted from a detector’s coil changes direction (e.g. 7.0 kHz = 7000 times per second) – higher frequencies are typically used to find targets such as gold nuggets, while lower frequencies are best for general purpose hunting.
Gold Pan A bowl-shaped, shallow container that traps gold flakes
Gravity Trap™ A patented gold pan made by Garrett which has 90 degree riffles to trap small gold
Ground Balance An adjustment made to “cancel” or ignore ground mineralization; may be done manually (See GroundTracking) or automatically
Ground Tracking The ability of a metal detector to continuously measure the ground’s mineralization and automatically adjust the detector’s ground balance setting for optimum performance
GTA (Graphic Target Analyzer) Exclusive Garrett technology that visually identifies a target’s conductivity or ID and also shows the discrimination pattern
GTI (Graphic Target Imaging) Exclusive Garrett technology that measures and displays a target’s true size and depth
LCD (Liquid Crystal Display) A graphical display that indicates target information, detector settings, etc…
Multiple Frequency See Pulse Induction and Multiple Frequency article
Microprocessor Computer chip that performs digital functions that make many features such as Target ID and Discrimination possible on today’s Garrett detectors
Mono Searchcoil Refers to searchcoils with one ring where both transmitter and receiver antennae are located
Motion Mode Refers to the setting where coil motion is needed to detect targets
Notch Discrimination Targets above and below these discrimination settings
Pinpoint A mode of operation that allows the operator to detemine the precise location of a target still in the ground
Pulse Induction Used primarily for heavily mineralized environments such as the beach or the gold fields of Australia and is found in many of today’s specialty detectors (See also Multiple Frequency)
PowerMaster Exclusive Garrett feature that increases the detector’s ability to detect deeper and wider – up to 20 percent
Probe A long screwdriver-like device usually made of brass used to penetrate the ground and physically locate a detected target before digging it up
Prospecting Hunting for valuable metals such as gold
Relic Hunting Hunting for targets with historical value, such as old  battlefield items or family heirlooms
Salt Elimination A detector’s ability to eliminate the interference of salt mineralization, which adversely affects detection depth and target ID  capabilities
ScanTrack A unique Garrett feature that automatically adjusts to the operator’s scan speed to achieve optimum performance
Searchcoil Also referred to as the “coil”, the searchcoil is the flat, typically circular disk swept over the ground to sense the presence of metal
Sensitivity Generally synonymous with Depth, the adjustment that determines how deep or small a target can be detected – the higher the sensitivity, the greater the detection depth
Shaft The adjustable stem that connects the control box and the searchcoil
Single Frequency Offers greater potential depth capabilities, better discrimination and enhanced target ID under most common soil conditions where most treasure hunting occurs (See Multiple Frequency article for more information).
Super Sluice™ Large 15″ gold pan with 1/2″deep riffles. Traps small gold nuggets up to one ounce and larger in size
Surface Elimination A detectors ability to ignore all targets located on or near the ground’s surface, which is useful in heavy trash areas
Surface Mount PC Board Technology The   latest trend in constructing electronic circuit boards PCBs
Target Any metallic item sensed by a detector